# Best Macrame Stands for Boards and Wall Hangings Source: https://cordandknot.com/best/best-macrame-stand Publisher: Cord and Knot. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://cordandknot.com/how-we-pick A macrame stand holds the work at a height and angle where you can knot without hunching, and which kind you need depends on the project. Bracelets, keychains, feathers and other small pieces are knotted on a board, and a desktop stand props that board up at an angle so the pins and cords face you instead of lying flat on the table. Wall hangings and plant hangers hang from a dowel or ring, so they need a rail at chest height instead: many makers use an adjustable garment rack, which holds a dowel at the right height and rolls out of the way afterwards. For a desktop stand, check how many angle settings it has, whether it folds flat, the base size against your board, and whether it has non-slip strips to stop the board sliding. For a floor rack, check the height range and the rail width against your widest dowel. This guide compares six stands using only what each Amazon listing states. Nothing here was tested by us. ## Picks ### 1. 1/2pcs Macrame Board Stand - Macrame Board Adjustable Stand Foldable, Hands- Macrame Board Metal Stand | Arts and Crafts Multi-Function Accessories, Braiding Cording Bracelet Creating for Macrame A folding metal board stand with 6 height settings and a support arm on each side. The most adjustable desktop stand here for setting the board angle to suit you. What the listing offers: - 6 adjustable heights are stated, so the board angle can be set for sitting at a table or a lower couch. - A triangular metal frame is described, with support arms on both sides to hold the board edge. - Folds flat, and the listing notes it also works as a tablet, book or sheet music holder. Limits to know: - The title says 1/2pcs, and the listing does not make clear how many stands the base price buys. - No board is included and the maximum board size is not stated. ### 2. PH PandaHall Wooden Macrame Stand Desk Macrame Board Stand 6x10.6 inches Folding Metal Craft Project Holder for Knitting Room Desktop Craft Beading DIY Handicrafts Bracelets Necklaces Making A wooden desk stand for a macrame board, about 15.5 x 21 x 27 cm, from PH PandaHall, a jewelry supply brand. A warmer-looking alternative to the metal stands. What the listing offers: - Dimensions are given: about 15.5 x 21 x 27 cm, and the listing describes a folding design. - Wood construction in beige, for anyone who prefers it to bare metal on a craft desk. - Bracelets, necklaces and beading are among the listed uses, which matches its compact size. Limits to know: - The title mentions both wood and a folding metal holder, so the exact materials are not fully clear. - The board size range is not stated, and no non-slip strip is mentioned. ### 3. Whitmor Foldable Garment Rack - Rolling Clothes Rack - Adjustable Height - Silver A Whitmor folding garment rack, 34.75 in wide and up to 66.25 in tall, with adjustable height and wheels. Not sold for macrame, but a common floor stand for knotting wall hangings. What the listing offers: - The rail height adjusts, so a dowel can sit at chest height whether you stand or sit to knot. - Assembled size is stated as 22 x 34.75 x 66.25 in, so measure your widest dowel against the 34.75 in width. - Folds in half for storage and assembles without tools, according to the listing. Limits to know: - A clothes rack, not a craft product: very wide pieces need a longer rail or a dowel tied across. - Takes floor space while in use, unlike a desktop board stand. ### 4. Macrame Board Stand, 8.3x7.5in Folding Metal Desktop Craft Project Holder An 8.3 x 7.5 in folding metal board stand with an anti-slip strap. Sized for the compact boards used for bracelets and small pieces. What the listing offers: - The footprint is stated in the title as 8.3 x 7.5 in, so you can check it against your board and desk. - Folding metal design with an anti-slip strap to secure the board. - The listing names bracelets, plant hangers and wall hangings as uses. Limits to know: - A small base, so a large 12 x 16 in board may overhang and feel less steady. - The bullets are generic and do not state the number of angle settings. ### 5. Qinlorgo Macrame Board Stand for Desktop Crafting, Folding A folding metal desktop stand with non-slip tape that tilts a macrame board toward you. A simple stand for bracelets, keychains and small wall pieces. What the listing offers: - Non-slip tape on the frame grips the board so it shifts less while you pull knots tight. - Folds flat for storage and travel to a class. - The listing names wall hangings, plant hangers and jewelry as projects it supports on a desktop. Limits to know: - The listing gives no dimensions and does not say how many angle positions it has. - No board is included, so it only helps if you already own one. ### 6. evhooe Desktop Macrame Board Stand Folding Metal Macrame Project Board with Anti Slip Tape for Braiding Cording A folding metal macrame board stand with anti-slip tape, sold as a project board holder for braiding and cording. A low-cost option for a first desktop setup. What the listing offers: - A metal frame that folds for carrying, which the listing says is meant to reduce neck strain while knotting. - Anti-slip tape is included to hold the board in place. - Among the lowest prices for a dedicated board stand in this guide. Limits to know: - No dimensions or angle settings are given in the listing. - Another seller lists a stand with word-for-word identical bullets, so the brand adds little to go on. As an Amazon Associate I earn from qualifying purchases.